PA Amplifiers

Redback PA Amplifier Stereo 15W

Packed with features, this super compact stereo amp is ideally suited to classrooms, boardrooms, boutiques, reception areas or anywhere a small functional stereo system is required. Designed in close consultation with several leading AV installation companies to suit todays requirements. Offering outstanding stereo performance and featuring both microphone and aux input, plus a 3.5mm headphone jack. For ease of use, inputs are included on both the front and rear panels for microphone and auxiliary input.

Mic Input: A balanced 3 pin XLR is provided on the rear panel and a 6.35mm jack on the front.

Aux Input: Dual RCA’s are provided on the rear panel, whilst a 3.5mm jack is provided on the front panel (ideal for iPod/MP3 player connection).

240V AC or 12V DC operation. Suits 4 to 8 ohm speakers.

 

Specifications:
Power Output: 15 watts RMS Stereo @ 13.8V into 4 Ohm
Distortion:< 3% @ 1kHzSignal to Noise Ratio
Typically 75dB below rated output.Frequency Response
Mic input: 50Hz – 10kHz, -3dB
Aux input: 60Hz – 15kHz, -3dB

Input Sensitivity
Mic 1: 1.5mV balanced
1.5mV unbalanced
Music Input: 1V
Aux Input: 1V

Output Connectors
Speakers: Screw terminals
Output impedance: 4-16
Headphones: 3.5mm socket
Input Connectors
Mic 1: 3 pin XLR balanced or 6.35mm jack unbalanced
Aux input: RCA stereo socket, bridged mono
Music input: 3.5mm socket
12V DC power: Screw terminals
240V AC power: IEC power connector

Controls
Mic Volume, Aux Volume, Bass, Treble, Balance, ON/OFF switch.

Indicators: Power

MISC.
Power supply: 240V AC or 12V DC
Protection: 2A AC fuse and 5A DC fuse
4 x 1A internal speaker protection fuses
Weight: ˜2.5kg
Dimensions: ˜270W x 160D x 44H mm
Colour: Black

Redback PA Amplifier 15W

Super compact with surprising performance specifications, intended for smaller PA system applications. Our engineering team based the design around a National TDA1519 monolithic IC achieving virtually “destruction proof” operation under quite severe misuse such as over temperature, over voltage, over load and short circuit speaker line conditions.

The amplifier is extremely stable even where microphone (balanced line) and speaker cables are run together for long distances. The unit will automatically shut down when severely overloaded and will restore to normal operation when the fault condition is removed. Suitable as a stand alone desk/bench unit or rack mount with optional hardware. Up to 2 units can be accommodated side by side in 1RU of rack space (44mm high). Dual power input option of either 240VAC or 12-14VDC is provided, making it well suited for use in tour buses and mobile installations.

 

Features:
• 15W RMS
• 1 balanced XLR and unbalanced jack mic input
• 1 Line input
• 4-8Ω output
• 240VAC / 12-14VDC operation
• Phantom power
• 3.5mm headphone connector on rear panel
• 10 year warranty
• Australian Made
Specifications:
Power Output
A 4016: 15 watts RMS
Distortion: < 3% @ 1kHz
Signal to Noise Ratio: Typically > 75dB
Frequency Response
Mic input: 50Hz – 10kHz, -3dB
Line input: 60Hz – 15kHz, -3dBInput Sensitivity:
Mic 1: 1.5mV balanced
1.5mV unbalanced
Line input: 500mVOutput Connectors
Speakers: Screw terminals
Output impedance: 4-8Ω

Input Connectors
Mic 1: 3 pin XLR balanced
or 6.35mm jack unbalanced
Line input: RCA stereo socket, bridged mono
12V DC power: Screw terminals
240V AC power: IEC power connector

Controls
Mic input: Volume
Line input: Volume
Power: On/off switch
Indicators: Power
Power supply: 240V AC or 12V DC
Protection: 1A AC fuse and 4A DC fuse
Weight: ≈2.5kg
Dimensions: ≈210W x 130D x 44H mm
Colour: Black

Redback PA Amplifier 30W 3 Input (Desk Mount)

This PA amplifier has been designed to meet the requirements of small to medium sized professional public address installations. Frequency response extends from 40Hz to 10kHz at a total harmonic distortion (THD) of less than 0.5%. Features such as push to talk (PTT) auxiliary muting, three combined balanced line microphone / stereo line inputs, tape out, and separate bass and treble controls give this amplifier a wide scope of installation applications, including schools, public halls, workshops and sporting complexes. Output may be 100V line or low impedance (8 – 16Ω) speaker loads. This unit features thermal overload shutdown, over current and short circuit protection.
Vox muting: The VOX circuit allows telephone paging via line input one or two (selectable internally). When paging via the telephone, all other line inputs are muted (ie. background music). Features variable sensitivity and time delay settings.

 

Features:
• Push to talk (PTT) muting on microphone 1
• 3 balanced microphone inputs
• Built in VOX muting circuit
• 3 stereo line inputs
• Bass and treble tone controls
• Tape output
• Output terminals for 100V line and 8 – 16Ω loads
• 240V AC operation
• Built in short circuit protection
• Thermal shutdown circuit protection
• 10 year warranty
• Australian designed and assembled
Specifications:
Distortion: < 0.5% @ 1kHz
Output line: 100V or 8 – 16ΩSignal to Noise Ratio:
All volume controls min, typically 72dB below rated output. All inputs display same S/N ratioFrequency Response:
Mic: 52Hz – 10kHz, -3dB
Line: 40Hz – 10kHz, -3dB

Input Sensitivity:
Mic 1: 2.6mV balanced or 3.2mV unbalanced
Mic 2: 2.6mV balanced
Mic 3: 2.6mV balanced
Line inputs: 150mV

Controls
Volume 1: Controls mic 1 / line 1
Volume 2: Controls mic 2 / line 2
Volume 3: Controls mic 3 / line 3
Bass: ±10dB @ 100Hz
Treble: ±13dB @ 10kHz
Power: On/off switch
Output Connectors
Speakers: Screw terminals
Tape out: RCA sockets
Muting: PTT via microphone, switch contacts or internal VOX muting. -79dB below rated output

Input Connectors
Mic 1: 5 pin DIN balanced or 3 pin XLR balanced or 6.35mm jack unbalanced
Mics 2 & 3: 3 pin XLR balanced
Line inputs: RCA stereo socket, bridged mono
240V AC power: IEC power connector
Power supply: 240V AC
Indicators: Power
Fuse protection: 1A AC, 1.5A x 2 DC internal

Size: 300W x 220D x 74H mm
Weight: 4.8g
Colour: Black

*Specifications Subject to Change Without Notice

Redback PA Amplifier 40W 4 Input

NOW EQUIPPED WITH 4 XLR MIC & 4 RCA LINE INPUTS

Designed to meet the requirements of medium sized professional public address installations, delivering an output power of 40W, 60W and 100W RMS respectively.

Frequency response extends from 60Hz to 15kHz at a total harmonic distortion (THD) of less than 0.5%. Features include, VOX muting, four balanced line microphone inputs, four stereo line input sockets, and separate bass and treble controls enabling a diversity of installation applications, including schools, public halls, workshops and sporting complexes.

VOX muting is in-built and can be activated on inputs 1 & 2 as required via the internal jumpers. Once activated input 1 will override all other inputs, including the alert/evac input. Input 2 will override inputs 3 & 4.

Powered from 240VAC mains or 24VDC permitting battery backup operation during mains power failure. Output is 100V/70V line or low impedance (4 – 16 Ohm) speaker loads. Note: 70V line is unavailable on the A 4036 40W amplifier.

All units feature thermal overload shutdown to protect the amplifier if a speaker fault condition develops.

Master volume can be controlled remotely via a figure 8 cable and a A 2280A wall control unit or 1K potentiometer (part no. R 2202).

 

Features:
Desk or 19″ rack mountable
Low noise and distortion levels
4 balanced microphone inputs
4 stereo to mono auxiliary inputs
Internally selectable phantom power
Optional tone generator board (A 2073)
Selectable VOX muting on inputs 1 & 2
Optional remote volume adjustment
Bass and treble tone controls
Output for 70V*, 100V line and 4 – 16 Ohm loads
240V AC or 24V DC operation
Thermal overload shutdown protection
10 year warranty
Australian Made
*70V line unavailable on A 4036 40W model
Specifications
?Power Output
A 4036: 40 watts RMS
A 4041: 60 watts RMS
A 4046: 100 watts RMS
Distortion: < 0.5% @ 1kHzSignal to Noise Ratio
Typically 75dB below rated output. All inputs.Frequency Response
Mic inputs: 50Hz – 10kHz, -3dB
Line inputs: 60Hz – 15kHz, -3dB
Output line: 70V*, 100V or 4 – 16O (Note. 70V unavailable on A 4036)

Input Sensitivity
Mic inputs: 1.5mV balanced
Line inputs: 400mV

Output Connectors
Speakers:Screw terminals

Input Connectors
Mic 1-4: 3 pin XLR balanced
Line inputs 1-4: RCA stereo socket
24V DC power: Screw terminals
240V AC power: IEC power connector
Muting: VOX on inputs 1 & 2, 60dB below rated output
Remote volume: Screw terminals

Controls
Mic inputs: Volume
Line inputs: Volume
Bass: ±10dB @ 100Hz
Treble: ±13dB @ 10kHz
Power: On/off switch
Indicators: Power, Overload
Power supply: 240V AC or 24V DC

Protection
A 4036: 1A AC fuse and 4A DC fuse
A 4041: 2A AC fuse and 5A DC fuse
A 4046: 4A AC fuse and 7.5A DC fuse

Weight/ DIMENSIONS
A 4036: ˜7.1 kg
A 4041: ˜7.4kg
A 4046: ˜9kg
Dimensions: ˜423W x 225D x 88H mm
Colour: Black

Redback PA Amplifier 100W 4 Input

NOW EQUIPPED WITH 4 XLR MIC & 4 RCA LINE INPUTS

Designed to meet the requirements of medium sized professional public address installations, delivering an output power of 40W, 60W and 100W RMS respectively.

Frequency response extends from 60Hz to 15kHz at a total harmonic distortion (THD) of less than 0.5%. Features include, VOX muting, four balanced line microphone inputs, four stereo line input sockets, and separate bass and treble controls enabling a diversity of installation applications, including schools, public halls, workshops and sporting complexes.

VOX muting is in-built and can be activated on inputs 1 & 2 as required via the internal jumpers. Once activated input 1 will override all other inputs, including the alert/evac input. Input 2 will override inputs 3 & 4.

Powered from 240VAC mains or 24VDC permitting battery backup operation during mains power failure. Output is 100V/70V line or low impedance (4 – 16 Ohm) speaker loads. Note: 70V line is unavailable on the A 4036 40W amplifier.

All units feature thermal overload shutdown to protect the amplifier if a speaker fault condition develops.

Master volume can be controlled remotely via a figure 8 cable and a A 2280A wall control unit or 1K potentiometer (part no. R 2202).

 

Features:
Desk or 19″ rack mountable
Low noise and distortion levels
4 balanced microphone inputs
4 stereo to mono auxiliary inputs
Internally selectable phantom power
Optional tone generator board (A 2073)
Selectable VOX muting on inputs 1 & 2
Optional remote volume adjustment
Bass and treble tone controls
Output for 70V*, 100V line and 4 – 16 Ohm loads
240V AC or 24V DC operation
Thermal overload shutdown protection
10 year warranty
Australian Made
*70V line unavailable on A 4036 40W model
Specifications
?Power Output
A 4036: 40 watts RMS
A 4041: 60 watts RMS
A 4046: 100 watts RMS
Distortion: < 0.5% @ 1kHzSignal to Noise Ratio
Typically 75dB below rated output. All inputs.Frequency Response
Mic inputs: 50Hz – 10kHz, -3dB
Line inputs: 60Hz – 15kHz, -3dB
Output line: 70V*, 100V or 4 – 16O (Note. 70V unavailable on A 4036)

Input Sensitivity
Mic inputs: 1.5mV balanced
Line inputs: 400mV

Output Connectors
Speakers:Screw terminals

Input Connectors
Mic 1-4: 3 pin XLR balanced
Line inputs 1-4: RCA stereo socket
24V DC power: Screw terminals
240V AC power: IEC power connector
Muting: VOX on inputs 1 & 2, 60dB below rated output
Remote volume: Screw terminals

Controls
Mic inputs: Volume
Line inputs: Volume
Bass: ±10dB @ 100Hz
Treble: ±13dB @ 10kHz
Power: On/off switch
Indicators: Power, Overload
Power supply: 240V AC or 24V DC

Protection
A 4036: 1A AC fuse and 4A DC fuse
A 4041: 2A AC fuse and 5A DC fuse
A 4046: 4A AC fuse and 7.5A DC fuse

Weight/ DIMENSIONS
A 4036: ˜7.1 kg
A 4041: ˜7.4kg
A 4046: ˜9kg
Dimensions: ˜423W x 225D x 88H mm
Colour: Black